What should be the minimum RF input voltage amplitude between LA and LB, GND pad left floating, VLA-VLB peak to peak for IC NT3H2111?
Below the MIN and MAX values:
Limiter starts at 2.2 Vrms and IC becomes functional. Max voltage is 4.6 Vrms.
Hope this helps.
Thanks for your reply.
I could see Vi(RF) [VI_RFmax = 4.6 V) in the datasheet. But it is mentioned as Vpeak. If I go with the datasheet then I can have a maximum of 4.6V*2=9.2V pk-pk across the pins LA and LB. But if I consider your values then the maximum voltage could be 4.6V*1.414*2=13V pk-pk and minimum voltage could be 2.2V*1.414*2=6.22V pk-pk. Please correct me if I am wrong and let me know what values I have to consider in my design.
And I didn't find anything about VI_RFmin in the datasheet.
Please consider the range below in Vrms:
Vi(RF) min is the minimum voltage for the IC to operate.
The correction to the unit of Vi(RF) max was already reported to the corresponding person and hopefully corrected in the next revision of the document. Thank you for your comprehension.
Have a nice day.
Retrieving data ...