Error: Processor LPC54608J512 is not suported or data for processor not avaliable ...
Hi Robson.
To solve your problem, please let us know:
1. Which IDE do you work with?
2. How to reproduce your issue?
Thanks.
Have a great day,
Jun Zhang
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
Thank you for your contact. I found maybe a solution,
-Djava.net.preferIPv4Stack = true ...... tools.ini and mcuxpressoide.ini
I'm checking this solution https://community.nxp.com/thread/490048
Em seg, 18 de fev de 2019 às 03:51, ZhangJennie <admin@community.nxp.com>
escreveu:
NXP Community
<https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Re: data for processor not avaliable
reply from ZhangJennie
<https://community.nxp.com/people/ZhangJennie?et=watches.email.thread> in *LPC
Microcontrollers* - View the full discussion
<https://community.nxp.com/message/1113908?commentID=1113908&et=watches.email.thread#comment-1113908>
Or you can also refer this article
How to Use MCUXpresso Config Tools on Offline Computer
Hope this helps.
Have a great day,
Jun Zhang
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------