AnsweredAssumed Answered

MCUXpresso Pin ConfigTools Error

Question asked by Hamed Mohammadi on Oct 23, 2018
Latest reply on Oct 23, 2018 by Hamed Mohammadi

Hi all,

 

I am trying to use pin config tool in MCUXpresso with my MKE04Z128VQH4 MCU. The problem is when I enable the SWD CLK and DIO pins, it doesn't let me enable FTM1-CH0 on pin 6. There seem to be no conflict by looking at the datasheet, but it tells me there is conflict in setting SWDE bit of SIM_SOPT0 register. Your help is appreciated.

Attachments

Outcomes