AnsweredAssumed Answered

P2040: Sector protection error

Question asked by gourav jain on Oct 1, 2018
Latest reply on Oct 1, 2018 by ufedor

Hello,

My board is based on P2040RDB board. While fusing pbl,f-man and U-Boot files in NOR flash via Code Warrior-10.5 i'm getting Sector protection error. 

Note: NOR flash is fresh one. going to fuse files first time.

 

fl::target -lc "P2040_gourav_se0-core00_SRAM_P2040_Connect"
fl::target -b 0x0 0x100000
fl::target -v off -l off
cmdwin::fl::device -d "S29GL01GP" -o "64Mx16x1" -a 0xe8000000 0xefffffff
cmdwin::fl::protect all off
Beginning Operation ...
-------------------------
Performing target initialization ...
Downloading Flash Diagnostics Driver ...
Reading flash ID ...
Unprotecting all sectors...
Unprotecting ...
Unprotecting ....
Unprotecting .....
Unprotecting ......
Unprotect Command Succeeded
cmdwin::fl::device -sd all
cmdwin::fl::device -se 1018
cmdwin::fl::erase list
-------------------------
Downloading Flash Device Driver ...
Reading flash ID ...
Erasing Sector 0xEFF40000 to 0xEFF5FFFF
Erasing ...
Error: Erase failed. Flash driver reports the following error(s): Sector Protection Error
Error: Erase failed. Flash driver reports the following error(s): Sector Protection Error

 

Kindly help me to resolve this issue.

 

regards,

Gourav

Outcomes