TLPX lane state timing specification of MIPI-CSI2

[takayuki_ishii]

Hello community,

Our customer request us about MIPI-CSI2.

They request that minimum requirement time of LP00, LP11, LP10, LP01 state.

Do you have some timing value of this?

Best regards,

Ishii.

[igorpadykov]

Hi Ishii

for mipi timings one can look at MIPI Alliance Specification for D-PHY 

available on https://www.mipi.org/

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[takayuki_ishii]

Hello Igor,

Thank you for your response.

And sorry my wrong question.

Our customer ask about following timing parameters of MIPI-CSI2 RX clk_p/n.

T(CLK-TRAIL),T(HS-EXIT),T(LPX),T(CLK-PREPARE),T(CLK-ZERO)

Please see attached document.

Best regards,

Ishii.