Hey all,
Following this guide in reference to an IMX6 eval board. Trying to get the thing working with Murata Wifi Module.
Apparently I have to apply 'Murata i.MX L3.14.52_1.1.0 Quick Start Binary Patch' to a Linux BSP for my application. I have the required Linux image, but getting the quick start binary patch is proving to be more difficult.
Whenever I try to access the link provided in the "Quick start guide" I'm taken to a page on the NXP site that states the content either does not exist, or that it's restricted.
The link in the document specifies https://community.nxp.com/docs/DOC-333855 as being the source for the required patch.
Any help would be appreciated.
Cheers,
Chris.
Solved! Go to Solution.
Hi Chris
please create service request for obtaining patch.
https://community.nxp.com/docs/DOC-329745
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi Chris
please create service request for obtaining patch.
https://community.nxp.com/docs/DOC-329745
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------