Hi,
I purchased the following product:
NFC USB Dongle - NFC Reader-Writer based on NXP’s PN7150 | MikroElektronika
It includes the PN7150.
On their product page they link to the following ZIP file for examples:
http://www.nxp.com/documents/software/SW4335.zip
However that page now gives an error.
Any idea where I can find that example code (the SW4335.zip file)?
Thanks,
Nick
You may try to use the SW4325. Then base on the schematic to modify the pins assignment (e.g. I2C, PIOs, etc.) setting to match the usb dongle board. Hope this can help.
For your information:
Download the NXP-NCI MCUXpresso example Project SW4325 from here:
NFC Development Kits for Arduino and more|NXP
Application Note: https://www.nxp.com/docs/en/application-note/AN11990.pdf
Schematic of the usb dongle.
The software is now available on the NXP website. Thanks to whomever restored it!
I'm having the exact same problem, the hardware is exactly what we need. But without the software it's pretty much useless to us. Never received a reply from Customer Support at MikroElektronika about this issue. Maybe someone here can help the both of us.