Is it possible to program my board by using hex/bin file and mcuxpresso ide?
I suggest to have a read here: Using Eclipse to Program Binary Files to an Embedded Target | MCU on Eclipse
So you could use the Segger interface (see above article), or you can convert the file in another format. I'm using the SRecord (SRecord 1.64 ) utility to modify and convert files. If you convert it to a binary, you can use the MCUXpresso built in flash programmer as well.
I hope this helps,
Thanks for help! It is working now
If I programmed my K64F board by using bin. or .hex file and "drag and drop" method will all flash also be erased?
Retrieving data ...