Hi,
I have imx6ul development board.
I want to try uImage (uncompressed) for booting.
From the link:
How to boot an uncompressed Linux kernel on ARM
it has commands to build uImage. But it is not working.\
I tried: make V=1 uImage from the locations:
./tmp/work/x86.../nativesdk-u-boot-mkimage/v2016.03+gitAUTO../git/tools
and from
./tmp/work-shared/../kernel-source/arch/arm/boot
I also tried /path_to/mkimage ...
no rule to make target.
Was I run from wrong folder or wrong command? What's missing?
Thank you,
David
