S32DS KEAZ128 Jlink仿真

[haifengjin]

  客户目前正在使用S32DS 开发KEAZ128，但是遇到Jlink无法仿真，用的是Jlink V8，请问NXP对这款软件支持的Jlink有什么要求，或则使用说明特殊设置。

[Alice_Yang]

Hello Haifeng,

1. Please provide the error when debug , and also the steps and configuration when debug.

2. There is no special configuration, please confirm J-link can support SKEZ128,

also support your PC system on SEGGER  website:

J-Link | SEGGER - The Embedded Experts 

Hope it helps

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[haifengjin]

hi Alice:

              我的步骤是采用S32DS的自带工程，步骤如下：板子采用官方的TRK-KEAZ128，我用官方的keil工程是可以下载的。S32DS不行

无法选择器件

[Alice_Yang]

Hi Haifeng,

Please add Device name :  SKEAZ128

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

[haifengjin]

hi  Alice:

               填上之后出现如下错误：

[Alice_Yang]

Hi,

Please show the three views I point below:

Also please change to a new workspace to try.

BR

Alice

[haifengjin]

hi 

           按照你的提示，选上elf，选上device，但是还是会报错：

[Alice_Yang]

Dear Haifeng,

1. In your screenshot , sorry I can't see which device you choose.

2. Also you haven't show the three view I mentiond:

3. Could you please take a video show your steps in detail, thanks!

BR

Alice

[elder_atom]

Dear Alice_Yang

    I meet the same question while I add the device name: SKEAZ128. Please help me solve this issue.

Thx!

[elder_atom]

Choose the right device name, and it works.

Thx everyone who shared the experience.