I am working on freescale MCIMX6DL-SDP board. I want to boot this board with barebox images.
For that I download the barebox-2017.06.1 source code and did the following steps:
1) Exported the path of cross compiler
After the last step I got the images in barebox-2017.06.1/images folder.
I tried flashing the image for mx6sabresd board by below command:
sudo dd if=barebox-freescale-imx6dl-sabresd.img of=/dev/sdb bs=1 seek=1 && sync
but the board is not booting with these images.
Kindly help me regarding this issue.