AnsweredAssumed Answered

Unable to SD boot on SABRE Automotive based i.MX6 Quad/DualLite board

Question asked by shravan sundar raj on Mar 22, 2017
Latest reply on Mar 30, 2017 by Artur Petukhov

Trying to boot  freescale SABRE Automotive based i.MX6 Quad/DualLite board from SD , unable to see any action in UART debug console . Board is powering up fine.

Below Command Used to flash image in SD card,

dd if=fsl-image-gui-imx6dlsabreauto.sdcard of=/dev/sdd bs=1M

Build Image Configuration :  imx6dlsabreauto

Build Command : DISTRO=fsl-imx-x11 MACHINE=imx6dlsabreauto source fsl-setup-release.sh -b build-x1

Outcomes