I have a board I need to bring-up but can't find this file on the web site.
Hello Martin Walton,
Hope you are doing great, You can request the BSDL files in this page Kinetis Symbols, Footprints and Models|NXP .
Have a great day.
I have requested the file - does this usually take very long to handle?
It would be good if these files were on the product page along with the data sheets.
Thanks very much
Hi Martin Walton,
I am sorry that this process is taking too long.
I found the document hope this works. I had two BSDLin case you have LQFP or BGA.
have a great day.
Thanks for the files, the BGA file does appear to be a correct match for the device I'm using, however, the actual device reports a different JTAG ID code to that found in the file.
When I scan the JTAG chain with the tool I'm using (XJTAG), I see a device with the id code 0x4BA0_0477, which I belive is an Arm manufacturer code. This is different from the ID code in the file you sent me, which is 0x0B3E_201D. Is there something I have to do to get this ID to appear on the scan chain, or some mode I have to put the device in for this to work?
Retrieving data ...