We are designing a handheld device with iMX6UL processor.The processor and peripherals are powered by the PMIC PF3001(MC32PF3001A7EP).
According to the pin-out diagram of PF3001 datasheet ,there is no standby pin in the PMIC.
But the "PF3001 simplified application diagram" (Figure1 on page1) of the PMIC datasheet ,shows a standby pin on PMIC,being controlled by the processor.(Figure attached below).
Can you please clarify the below doubts.
Q1. Is standby pin (or any equivalent pin) available on PMIC, MC32PF3001A7EP.
Q2. If the standby pin is not available,how can we bring the PMIC to standby.