Question1: which is processors 0? Whether there is a Mapping table?
MPC5775 have 4 core，one e200z420,one e200z419,two e20z7260.
the print screen you posted is from obsolete reference manual (rev.2). Actual version is revision 4 and there is different register description. There are three bits for processor selection.
The following table shows processor numbers and core types.
If you have any other question, please feel free to write me back.
Thank you for your reply.
I can't find reference manual (rev.4) in NXP web(http://www.nxp.com/).
You give me a copy reference manual (rev.4).
my email : firstname.lastname@example.org
The information you are requesting is under NDA at this time. If you have already signed an agreement, please contact the person who assisted you. If you have not signed an agreement, please contact your local NXP Distributor Salesperson or FAE for assistance. For a listing of our distributors, please refer to: http://www.nxp.com/buy/distributor-network:DISTRIBUTORS
Retrieving data ...