AnsweredAssumed Answered

parallel RGB data enable in imx6

Question asked by Redwan Mohamed on Sep 17, 2016
Latest reply on Sep 18, 2016 by Yuri Muhin

We have used DI0_PIN4 pad in our design for data enable signal for the parallel RGB interface, which we have configured as below in the dts (but not getting data enable signal as expected)



I was going through the IMX6DQCEC.pdf which says IPUx_DIx_PIN15 as data enable signal. Please advice whether we can use IPUx_DIx_PIN4 as data enable or not