We have a question about EIM byte access.
The EIM is configured for 16-bit Non Multiplexed Address/Data mode communication [ DSZ=010, MUM=0].
( Single Asynchronous mode Access)
Address_bus : EIM_ADDR[25:0]
Data_bus ：EIM_DATA[23:16] - EIM_EB2_B
Data_bus ：EIM_DATA[31:24] - EIM_EB3_B
I set 'AUS=1' of EIM_CSnGCR1.
also, I set 'MUM=0' of EIM_CSnGCR1.
When we execute the " byte read(even/odd) access" to EIM at non-shift address mode,
Address[25:1] signal runs well(High or Low), but
Address0 no change(Always Low).