I'd like to decide internal PUS, PUE and/or PKE and the values.
In the HDGW 22.214.171.124 RGMII discusses as follow.
“Drive strength Controlled by bits [5:3] (DSE) of the following registers
in IOMUXC (IOMUX controller):
IOMUXC_SW_PAD_CTL_PAD_RGMII_TDx (4 registers)
IOMUXC_SW_PAD_CTL_PAD_RGMII_RDx (4 registers)”
However the IBIS currently supports only the 2.5 V option.
We are using 1.5V.
Could you advice how to decide PUS, PUE and/or PKE and the values?