David Evennou

NXP FRDM-K64 Users Guide Misleading Pinout Information - BT J199 Connector

Discussion created by David Evennou on Jun 23, 2016
Latest reply on Jun 23, 2016 by Fang Li

Hello NXP,

I am not sure if this is the right place to report this since the Service Request system has been changed.

In the FRDM-K64F Freedom Module User’s Guide on Page 19, I noticed that there is misleading information for the BT J199 header pinout.  The text location really should be reversed since Pin 1 is on the left.


Document Number: FRDMK64FUG User’s Guide

Rev. 0.1, 04/2014


(See attached picture, yellow mark is pin 1)