C/C++ project settings disappeared!

[lpcware]

Content originally posted in LPCWare by nw002 on Tue May 01 07:22:20 MST 2012
For some reason, under Project > Properties > C/C++ Build > Settings, the tabs for "Tool settings", "Build steps" and "Build Artifact" are no longer visible. Now I can only see "Binary Parsers" and "Error Parsers" there.

Q1. Does anyone know why or how this happened?
Q2. How do I get them back, and stop it happening again?

LPCXpresso v4.2.2 release 275

thanks!
Nick

[lpcware]

Content originally posted in LPCWare by researchinnovation on Wed May 02 22:14:57 MST 2012
@larryvc....!!!

Hi...!!!
Thread is still open I guess.
Issue has been not solved yet....!!!
By the way if it so then please save your own time, its my just a suggestion.

Thanks & Regards...!!!:)

[lpcware]

Content originally posted in LPCWare by larryvc on Wed May 02 13:02:38 MST 2012

---

Quote: researchinnovation
@Nw002                     [IMG]http://knowledgebase.nxp.com/images/statusicon/user_offline.gif[/IMG]:-

Hi..!!!

Open new workspace or switch your workspace at different location and then try.
If it doesn't happen at all then please reinstall you LPCxpresso or Code Red.
It should work.

Thanks & Regards...:)

---

From what I read earlier in the thread the problem was solved.  Why are you suggesting that he waste time at this point?

[lpcware]

Content originally posted in LPCWare by researchinnovation on Wed May 02 03:55:34 MST 2012
@Nw002 [IMG]http://knowledgebase.nxp.com/images/statusicon/user_offline.gif[/IMG]:-

Hi..!!!

Open new workspace or switch your workspace at different location and then try.
If it doesn't happen at all then please reinstall you LPCxpresso or Code Red.
It should work.

Thanks & Regards...:)

[lpcware]

Content originally posted in LPCWare by Ex-Zero on Tue May 01 08:37:16 MST 2012

---

Quote: nw002
For some reason....

---

  ;)

[lpcware]

Content originally posted in LPCWare by nw002 on Tue May 01 08:25:39 MST 2012
"Generate Makefiles automatically" was unchecked ;-)

[lpcware]

Content originally posted in LPCWare by Ex-Zero on Tue May 01 08:18:09 MST 2012
Wrong 'Builder Settings' in 'C/C++ Build'  :confused:

Perhaps you should export and post your project :rolleyes:

[lpcware]

Content originally posted in LPCWare by nw002 on Tue May 01 08:08:56 MST 2012
It says Debug [Active] BUT it's greyed out - as is the manage configurations button to the right.

Nick

[lpcware]

Content originally posted in LPCWare by Ex-Zero on Tue May 01 08:04:43 MST 2012
Does your 'C/C++ Build' window show an active configuration?