I am newbie on S32DS. I am trying to create a new project like File -> New -> New S32DS Project. I couldn't see processors. Something installed wrong way or not installed yet? Waiting for your help.
Thanks in advance
Could you possibly attach your .log located in <workspace>\.metadata?
Which OS do you use?
This may help us to identify what is wrong.
Thank you for your interest. I attached the log file below. My OS is Windows 7 professional.
One more comment:
Could you try to use a new clean workspace?
How do i create a new clean workspace?
When you start S32DS IDE it asks you to enter a workspace directory:
So if you add a new folder which doesn't exist yet it creates a blank new workspace for you.
It doesn't work, same problem appeared...
It seems that something wrong happened during installation.
Could you possibly try to re-install and reboot? Do you have any other machine you can test it with?
If it does not help - could you send us entire zipped eclipse directory (~500MB).
Thanks a lot for your cooperation!
I have tried to work with another machine and seems same result. Could you please share system requirements of S32DS?
Also, I am sharing the eclipse file with two parts in below.
Thanks for the update.
Regarding system requirements - it's mentioned in the release notes (c:\Freescale\S32_ARM_v1.2\S32DS\Release_Notes\Release_Notes.pdf). See the snippet below.
Anyway in your case I suspect the issue might be caused by an interference with another application/program.
I've informed our development team about the issue so the investigation is in progress.
3 System Requirements
3.1 Recommended Configuration
2.6GHz Pentium® compatible processor or better
400MB on Windows system disk
USB port for communications with target hardware
Ethernet port for communications with target hardware (optional)
3.2 Operational Minimum Configuration
1.8GHz Pentium® compatible processor or better
3.3 Host Operating System Support
Microsoft Windows 7 32-bit and 64-bit (Home Premium Edition and Professional Edition)
Microsoft Windows 8 32-bit and 64-bit (Home Premium Edition and Professional Edition)
Microsoft Windows 8.1 32-bit and 64-bit (Home Premium Edition and Professional Edition)
Microsoft Windows 10 32-bit and 64-bit (Home and Pro Editions)
Thank you for your fast reply. Waiting the result of development team.
I got one more question that out of this topic. Which program should I use for programming KEA family processor via U-Multilink? Is there any programming enviroment except S32DS IDE?
Did you find the reason to the question?
I am also facing the same issue.
Can you please let m know how did you solve this issue?
Unfortunately, i could not solve the problem. I decided to use Codewarrior.
I got to know the solution.
I need to install S32 Design Studio for Power Architecture IDE, (not S32 Design Studio ARM) that supports MPC5748G controller.
Power Architecture IDE, they are releasing within a week.
Thank you for the alternative option, Codewarrior.
Specifically for KEA there are multiple choices. It's supported by both CodeWarrior for MCUs 10.6 and KDS There is also a standalone flasher available for programming by pemicro:
P&E Microcomputer Systems: Over 30 years as an Industry leader in Embedded Systems Development Tools, debug probes, and …
What about eclipse file research by your side? Did you catch the problem?
Retrieving data ...