AnsweredAssumed Answered

Imx6 sabresd board unable to boot after we provide boot arguments

Question asked by Deepak Kalalbandi on Apr 26, 2016
Latest reply on Apr 27, 2016 by Suraj K

Dear All,

 

I have flashed Android image 5.1.1 image onto SD card and have to pass boot arguments such as

 

U-Boot > setenv bootcmd boota mmc2

 

U-Boot > setenv bootargs console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32

 

video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0

 

consoleblank=0 androidboot.hardware=freescale cma=384M

 

U-Boot > saveenv

 

once we pass the above arguments and insert the SD card onto the board, SABRESD board is unable to bootup.

 

Our main objective is to enable Murata BT-Wifi module, inorder to do that we have to pass the above arguments and also we are unable to Root the sabresd board( we are trying to flash prebuilt images from NXP website)

Outcomes