Is there any other micro of family MPC560xx which supports CAN FD?
CAN-FD is not present on any MPC56xx device, it is available with certain MPC57xx device only.
Can you please tell us the exact part details of this micro (MPC570x with e200z0 core) ? If possible share the link for datasheet....
None uses e200z0, they use z7, z4 and z2 cores.
Hello David Tosenovjan
Do you have any document stated the difference between these cores ?
I have shared old presentation that compares and describes e200 cores:
e200 Core Training relevant to MPC55xx and MPC56xx device family
Regarding MPC57xx there is also overview document that could be useful:
We are currently using the micro SPC5602BK0MLL4, 24k RAM 256K flash and we are looking new micro with below requirements,
Memory Requirements :
ROM 1 MB
RAM ≥ 64 KB
Data Flash ≥ 64 KB
Other Major Peripherals :
2 LIN channels
2 CAN channel
7 analog I/P ports
please suggest lowest package possible micros with minimum changes for porting current SW to new micro.
As there is lot of options, firstly I would recommend to see following selector guide:
Retrieving data ...