Is my calculation correct? Assume the system clock is 100MHz, and its 1/16 is selected as the input clock to eSPI Baud rate generator. PM is set to the max value of 15, then the SPI clock will be 100M/16/(2*(15+1))=0.195M.
SPI minimum clock frequency estimation:
a) SPI module input clock is platform clock divided by two. b) the SPI module input clock may be pre-divided by /16 by setting DIV16n bit in ESPI_SPMODEn register.c) this pre-divided clock is further divided by prescaler configurable by PMn field and its maximum division ratio is 32.
Resulting maximum division ratio of the platform clock is /2/16/32 = 1024. Minimum supported CCB frequency is 266 Mhz, so minimum SPI clock frequency is 260 kHz.
Retrieving data ...