Dear All,
For one of our projects we need a design for booting/Flashing the MPC5606B either through CAN or by RS232.
We are in time crunch project were we need to decide the simplest design for flashing either through CAN or RS232.
Please let me know if there is already a bootloader available which i could use for my project or any RS232 application notes for flashing.
Any source files or example would of great help.
Also let me know the recommend procedure for MPC5606B booting.
Regards,
Raghavendra
Hi,
take a look at this draft of application note:
https://community.freescale.com/servlet/JiveServlet/download/427962-279359/bootloader.zip
Regards,
Lukas