Hi every one
We iserted wl18xx.ko,cfg802.ki,mac.ko,wlcore.ko iserted and checked with lsmod all the modules are inserted .
firmware also copied in to perticular firmware folder.and wpa_applicant.conf also copied .
but i gave
$ifconfig wlan0 up
ifconfig wlan0
ifconfig: wlan0: error fetching interface information: Device not found
Hi veeranjaneyulu
please refer to below link
WL18xx First Time Getting Started Guide (IMX6) - Texas Instruments Wiki
also suggest to contact ti for updated firmware for your wifi module, since it
may be different on different modules.
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Thanks igor
we followed that link and created .ko's .Those .kos are inserted but showing device not found .we checked hardware jumpers and power supplies.
all are ok. After booting target we insert modules by using insmod .and lsmod showing list of modules.
$ifconfig wlan0 up
not showing list of wlan connections.
Thanks & Regarding
veeranjaneyulu
Hi veeranjaneyulu
please post this to ti wiki.
~igor