I am trying to run the DDR stress test on my custom board(based on imx6solo) but i am getting below error. can you please take a look on our attached xlsx sheet and give us your feedback ? we are using DRAM (Hynix - H5TC4G63CFR-PBA ) -data sheet attached.
here are the steps, which i have tried so far :
Referred this thread: DDR Stress Test fails to load on iMX6 DL
A ) unchecked "Verify DCD Address" option.
B) Removed (WDOG cannot be accessed via serial bootloader)
setmem /16 0x020bc000 = 0x30
thanks and regards