Where can I find the Codewarrior expert codes for MPC5668G EVB to begin with?
Maybe you can find some examples when settingup the software CodeWarrior. The possible path is "C:\Program Files (x86)\Freescale\CW for MPC55xx and MPC56xx 2.10\(CodeWarrior_Examples)". Good luck
Thank you. There are many example projects available in the path you have mentioned. But not specifically for MPC5668G EVB. May be these examples could help me in understanding basics. Thank you again,
I am attaching such a base project for MPC5668G device.
Also pay attention to following appnote that however uses GHS environment for these examples:
Thank you very much for the Response.
Do you have hands-on experience with MPC5668G EVB and Codewarrior? I received the EVB 2 days before. I havent changed any Jumper settings. Tried to run a simple blink led code to blink the user LED's. It did not work. Do i need to make any change in Jumper Settings?
Yes, it works normally. But it is needed to connect pin PH10 to user led header (P15) by wire.
Retrieving data ...