I tried to run freescale sensor fusion using KDS, and I get the following error:
Launching 'FSFK_kl25z.elf' has encountered a problem Error starting process
Any help will be appreciated.
good timing, as I'm exploring the sensor fusions projects myself right now too, for my quadrocopter project (Kinetis Drone: Driving the Electronic Speed Controllers). What I realize and see is that the debug configurations in these sensor fusion projects are not properly configured. It looks the projects have been renamed without updating the debug configurations.
digging into it, I have found unfortunately several issues in the project setup.
Good news is: I have the SensorFusion5\KDS\KDS3 FRDM 3DOF Bare Board Tiltmeter\FRDM_KL25Z project running sucessfully now (attached).
Bad news is: I'm able to build and debug the SensorFusion5\KDS\KDS3 FSFK\FSDK_KL25Z too, but it fails at runtime as this demo expects the MultiB shield.
It seems not be prepared and working just with the accelerometer on the board.
I have that project attached for you too.
Just in case this helps,
Retrieving data ...