I cannot create static module using Processor expert. Any advise ? I want type define files , because i have dependancy with other module. If any detail user manual for "processor Expert", please recommend.
Could you provide more details about your issue, please? What exactly you want to do?
Nothing special project. I just to create LED blink program on KL26z board. This is first time using KDS and freescale and I just follow the user manual. At the beginning it is OK, if I use fsl_gpio component, but if i use "LED" driver from "mcuoneclipes" component, it have some variable type "word". But this is not defined type in my project, afterthat i checked on internet, all talking about this macro define files and PE manual also have info on this. But this static modules are missing inside my "Generatoed_code" folder. May be i doing something wrong / missing.... but this manual not have info about , how to enable/ disable this macro define file generation.
So my proplem here is , my project don't have this "PE_Types.h" file.
If you want to use components from the "mcuoneclipse" site you cannot use Kinetis SDK. When you create a new Kinetis Project with Kinetis SDK and Processor Expert the Kinetis SDK header files (definitions) are used instead.
Create the new project by the following way:
- Select File > New > Kinetis Project to create a new project
- Write the name of the new project, click on the Next button
- Select the KL26Z derivative and click on the Next button:
- Select Kinetis SDK: None and check Processor Expert, click on the Next button:
- Select the target compiler (use the default) and click on the Finish button.
A new Processor Expert project is created (without Kinetis SDK) that contain the required definition of the PE_Types.h, see below:
Retrieving data ...