i have initialized the CAN module to work at 500 Kbps, now i have transferred my buffer data to Tx registers (MSCAN_TEDSRx). i am not able to transmit the data via CAN bus. AM i missing something ??
Based on the Reference Manual, the procedure to initially start up the MSCAN module out of reset is as follows:
Besides, I would like to recommend the MSCAN driver for Kinetis EA devices.
In case you are interested please refer to the following link:
KEA |Kinetis KEA Automotive MCUs|Freescale
Finally, the following document could be useful because of the basic concepts.
Bosch Controller Area Network (CAN)
Please let me know if this material is useful for you, in case it is not I will be glad to help.
Have an excellent day.
Retrieving data ...