Hi. All.
want to boot i.MX6SoloLite Custom Board From eMMC Interface, for that I need to configure the boot device selection.(BT_FUSE_SEL or eFUSE)
How can Configure the BT_FUSE_SEL value or eFUSE value. ?
ver : uboot-2009.08, linux-3.0.35
Regards,
Solved! Go to Solution.
Hi changyong
please check
Q&A: How to program i.MX6 eFUSE?
https://community.freescale.com/docs/DOC-95458
~igor
Hi changyong
please check sect.8.5.2.1 Expansion Device eFUSE Configuration
IMX6SLRM i.MX 6SoloLite Applications Processor Reference Manual
and Chapter 7 Avoiding Board Bring-up Problems
IMX6SLHDG Hardware Development Guide for i.MX 6SoloLite - User Guide
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi changyong
please check
Q&A: How to program i.MX6 eFUSE?
https://community.freescale.com/docs/DOC-95458
~igor