AnsweredAssumed Answered

CTS & RTS reversed

Question asked by vinod kaduppadi on Jul 6, 2015
Latest reply on Jul 6, 2015 by igorpadykov

Hi In one of our design based on imx-6 the CTS and RTS lines from IMX-6 were connected to RTS and CTS respectivley

 

imx-6 CTS  ---> RTS(Module)

imx-6 RTS  ---> CTS(Module)

 

But the Modules CTS was an input and the RTS of the module is an output which is conflicting with imx-6 CTS and RTS direction

 

The TXD and RXD is fine which are criss crossed ,

 

Is there a way in imx-6 to swap only the CTS and RTS signals and leave the TXD and RXD unaffected ,

 

thanks

vinod

Outcomes