I want to know when not set interrupt priority of M0+/M4,the interrupt priority of my used interrupt ?
It is called NVIC - Nested Vector Interrupt Controller.
Please, check these links:
Introduction for NVIC
and Using NVIC on Cortex-M4 and Cortex-M0
Using NVIC on Cortex-M4 and Cortex-Mo
NVIC you find in Reference manual for your chip.
I hope this helps,
only set Interrupt,dont set priority,if I use PORTA .this PORT priority is what?
Hi, Mack, it depends in the board that you are using, there are 4 levels of priority (from 0 to 3) that you can use,being 0 the one that has more priority, in the reference manual there is a register that you can configure to set the priorities of the interruptions the (IPRx). in the first file that Iva Sent to you, in the page 6 there is some information about the priorities.
For example in the KL25z in the reference manual, P.52 you can find the priority levels for the Ports and a Table that explains it.
Retrieving data ...