AnsweredAssumed Answered

u-boot NAND flashing in iMX6

Question asked by Rajendra Baniyavar on Apr 8, 2015
Latest reply on Apr 9, 2015 by Rajendra Baniyavar

Hi,

 

Currently I am using MFG tool to flash u-boot.bin, due to project requirement I am looking for method to flash uboot without using MFG tool. I have tried below methods, but to my surprise they are not working.

1. dd command : sudo dd if=u-boot.bin of=/dev/mtdblock0 or sudo dd if=u-boot.bin of=/dev/mtdblock0 bs=1K seek=1 skip=1

2. nandwrite -p /dev/mtd0 u-boot.bin

3. tftp + nand erase + nand write

 

My build environment is LTIB and target is iMX6 solo. I checked script file used by MFG tool, it is using kobs-ng. Is this mandatory?

 

Thanks

Rajendra

Outcomes