Hello
After downloading original images to SD card, Linux is booted. But Ethernet link is down. Could somebody tell me what happens?
Thank you.
Hello Osamu,
You need to set the ip to "none" in your bootargs.
Can you please print your bootargs and paste them?
Hello
Thank you for your response.
>Can you please print your bootargs and paste them?
bootargs_base=setenv bootargs console=ttymxc0,115200
bootargs_mmc=setenv bootargs $ root=/dev/mmcblk0p1 rootwait
bootcmd_mmc=run bootargs_base bootargs_mmc; mmc dev 1; mmc read $
0x800 0x2000; bootm
bootcmd=run bootcmd_mmc
It seems "bootargs" is "console=ttymxc0,115200".
Thank you.
2015-01-29 6:21 GMT+09:00 SergioSolis <admin@community.freescale.com>:
<https://community.freescale.com/>
"i.MX 6SoloLite Manufacturing Toolkit"
reply from SergioSolis
<https://community.freescale.com/people/SergioSolis?et=watches.email.thread>
in i.MX Community - View the full discussion
<https://community.freescale.com/message/475247?et=watches.email.thread#475247>
Hello
Thank you for your replay.
I'll try to set boot arguments.
Regards
2015-01-30 7:42 GMT+09:00 SergioSolis <admin@community.freescale.com>:
<https://community.freescale.com/>
Re: "i.MX 6SoloLite Manufacturing Toolkit"
reply from SergioSolis
<https://community.freescale.com/people/SergioSolis?et=watches.email.thread>
in i.MX Community - View the full discussion
<https://community.freescale.com/message/475724?et=watches.email.thread#475724>