i have enabled I2C-gpio as below in the file "imx6qdl-<myplatform>.dtsi"
compatible = "i2c-gpio";
gpios = <&gpioX a 0 /* sda */
&gpioX b 0 /* scl */
i2c-gpio,delay-us = <5>; /* ~100 kHz */
i2c-gpio,timeout-ms = <100>;
#address-cells = <1>;
#size-cells = <0>;
the i2c is getting detected and new adapter added.(i2c0.28)
if i try to use i2cdetect tool there is always single pulse coming in SCL (clock is expected )
so, any updated on this, did anybody tried i2c-gpio on imx6q with 3.10.17 kernel ?