We are using IMX6 solo lite for one of our application we are having some doubts on booting the processor.
As per our design we have connected Boot mode pins configuration as 00 i.e.., Select from EFUSES So for my application I have connected SD card which is connected to SD3 or from EMMC which is connected to SD4.
I need to know
- How to change the boot fuse selection value (BT_FUSE_SEL) before booting
- How to blow the EFUSE s before booting from SD card. Any tool is required like MFG
- After EFUSEs are blown whether SD card will support SD3 and EMMC will support SD4 of processor port or not.