AnsweredAssumed Answered

EGL application issue on i.mx6 based Analog display

Question asked by Shabeer Badarudheen on Oct 19, 2014
Latest reply on Oct 28, 2014 by Bio_TICFSL

Hi,

In our current project we are using both analog and dvi display. Initially we done the developments based on dvi display.

We then apply the patches https://community.freescale.com/docs/DOC-94019/version/2 to enable the analog display on imx6,

after applying the patches, analog display is getting.

 

But the problem is that the EGL application is not show clearly, the same application working perfectly on the dvi display.

Our GUI consists of simple circles some thing similar to RADAR display .                     

if we run the demo application based on egl we saw the edjes are not sharp and some minor colour difference which is not occurs in a dvi display.

The board and Application details given below:

 

BSP: Freescale BSP 3.0.35 (LTIB), imx6 sabresd based custom board

Application : based on open gl es 2

 

Could somebody please help us?

 

Regards

Shabeer

Outcomes