AnsweredAssumed Answered

OTG connection when used as device

Question asked by Vignesh Vasudevan on Oct 16, 2014
Latest reply on Oct 16, 2014 by igorpadykov

I am using I.MX6 in one of my boards, I believe the USB_OTG_VBUS(pin E9) of I.MX6 need not be connected to 1st pin of OTG connector if I.MX6 OTG is intended to be used as device.

Only the data lines and GND connection is sufficient for communication, isnt?

Please let me know whether my understanding is correct.

Outcomes