Dear all,
We want to perform a USB compliance test for USB Host port of i.MX6.
It is necessary to transmit a test packet from USB Host port.
We think that USB Host must be entered into such mode.
Would you teach the register setting to transmit a test packet from USB Host port?
May I have advice?
Best Regards,
Yuuki
Solved! Go to Solution.
Hi Yuuki
please check sect.34.9 "Testing the host mode"
iMX6_Firmware_Guide.pdf included in SDK
Best regards
chip
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
Hi Yuuki
please check sect.34.9 "Testing the host mode"
iMX6_Firmware_Guide.pdf included in SDK
Best regards
chip
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------