AnsweredAssumed Answered

QNX Board bootup problem for IMX53 QSB

Question asked by MahadevaSwamy L on Jun 9, 2014
Latest reply on Jun 10, 2014 by Glen Fine
Branched to a new discussion

Hi All,

 

I am trying to port the QNX BSP for IMX53 QSB; I was able boot the image from the sdcard. But it is stuck in endless loop for I2C read write error.

I am getting this following messages...can anyone please help on how to proceed further?

 

Thanks

Swamy

 

==========================================================================

 

Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_write_register i2c write failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_write_register i2c write failed (code 5)

Starting SPI driver for CSPI (dev/spi0) ...

Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)

Starting Enhanced SPI driver for ECSPI1(dev/spi1) ...

Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)

Starting Enhanced SPI driver for ECSPI2(dev/spi2) ...

Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)

Starting SSI Audio driver for SGTL5000 ...

Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)

Starting USB Host drivers (upper + lower ports) ...

Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 5   100 cam-disk.so (Jun 15 2012 04:46:05)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)

Path=0 - FREESCALE MX35 e

target=0 lun=0 Direct-Access(0) - SD:27 00000 Rev: 1.0
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:152 6 0 Master send did not terminate
Jan 01 00:00:152 6 0 Master send NACK
Jan 01 00:00:155 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:152 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:162 6 0 Master send did not terminate
Jan 01 00:00:162 6 0 Master send NACK
Jan 01 00:00:165 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:162 9 1 mc34708_comms_read_register i2c write read failed (code 5)

Starting Graphics driver ...

Jan 01 00:00:162 6 0 Master send did not terminate
Jan 01 00:00:162 6 0 Master send NACK
Jan 01 00:00:165 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:162 9 1 mc34708_comms_read_register i2c write read failed (code 5)

Starting SGX GPU driver...

Jan 01 00:00:162 6 0 Master send did not terminate
Jan 01 00:00:162 6 0 Master send NACK
Jan 01 00:00:165 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:162 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:162 6 0 Master send did not terminate
Jan 01 00:00:162 6 0 Master send NACK
Jan 01 00:00:165 9 1 mc34708_comms i2c_write_read failed (code 5, rbytes 0)
Jan 01 00:00:162 9 1 mc34708_comms_read_register i2c write read failed (code 5)
Jan 01 00:00:162 6 0 Master send did not terminate

Outcomes