This device has 3 SCI's. On page 40 of the data manual;
TXD2 and RXD2 are identified as pins 22,23
TXD1 and RXD1 are identified as pins 51,52
TXD0 and RXD0 are identified as pins 33,34 AND 47,48
Surely this must be a mistake or am I missing something?
Thanks,
Ascii.
Freescale support provided this answer;
Please find such decription from reference manual below.
6.4.3 SCI0 pin reassignment
After reset, SCI0 module pinouts of RxD and TxD are mapped on PTB0 and PTB1,
respectively. SOPT1[SCI0PS] bit enables to reassign SCI0 pinouts on PTA2 and PTA3
So yes, I was missing something!
Ascii