AnsweredAssumed Answered

MFG tool build in linux

Question asked by anil bhaskar on Mar 14, 2014
Latest reply on Mar 19, 2014 by anil bhaskar

we are facing a problem in porting the linux using this MFG tool.

 

i just want to put linux image in my SD card then will plug that SD card in the Imax6 Dual processor.

in MFG tool user manual, they are showing how to put image in SD card.

http://www.freescale.com/files/training_pdf/WBNR_LA13_IMX6QPR_PDF.pdf?lang_cd=en

in this PDF from page 27-32 you will find out the steps.

 

 

we are following these steps.

 

step 1. cat /proc/partitions
step 2. dd if=u-boot.bin of=/dev/sdb bs=512 seek=2 skip=2 conv=fsync
step 3. dd if=uImage of=/dev/sdb bs=512 seek=2048 conv=fsync
step 4. fdisk /dev/sdb

a. u

b. d

c. n

d. p

e. 1

after this we dont know what to do.

we tried to enter 16384 but it says its out of range.

could you tell us what to do after this e step.

one.png






two.png

Outcomes