Vybrid Hardware PC simulator

sandeepnagabhus · ‎02-27-2014

Hello,

I would want to run the AUTOSAR MCAL on PC environment for Vybrid VF6xx microcontroller. Please let me know the right version of CodeWarrior Development Studio and the plugins required for my purpose.

Thank you very much.

naoumgitnik · ‎03-03-2014

Dear Sandeep,

Unfortunately, Vybrid does not work with CodeWarrior. Our officially supported software tool is DS-5 by ARM.
There are, though, software companies whose products support Vybrid, e.g. Atollic TrueSTUDIO, Segger J-Link, IAR Embedded Workbench, Lauterbach TRACE32, Mentor Embedded, but it is their responsibility to support them.

Sincerely, Naoum Gitnik.

View solution in original post

naoumgitnik · ‎03-03-2014

Dear Sandeep,

Unfortunately, Vybrid does not work with CodeWarrior. Our officially supported software tool is DS-5 by ARM.
There are, though, software companies whose products support Vybrid, e.g. Atollic TrueSTUDIO, Segger J-Link, IAR Embedded Workbench, Lauterbach TRACE32, Mentor Embedded, but it is their responsibility to support them.

Sincerely, Naoum Gitnik.

jackblather · ‎03-03-2014

Please note that when you purchase a Vybrid tower board or the entire Vybrid tower, you get a free one-year license to DS-5.

See the section under "Kit Contains" at this link:

TWR-VF65GS10: Vybrid Controller Solutions Tower System Module