Please tell us about VDD1P5 of i.MX28.
In my design, there is no LV-DDR2 memory and it is just connected to the capacitors(0.01uF ~ 22uF).
In this case, is it OK to eliminate these capacitors ?
You can disable the 1V5 linreg via HW_POWER_VDDMEMCTRL : ENABLE_LINREG register/bit, then you should be fine not connecting anything to the pad.
Had your issue got resolved? If yes, we are going to close the discussion in 3 days. If you still need help please feel
free to contact Freescale.
This discussion is closed since no activity. If you still need help, please feel free to reply with an update to this discussion, or create another discussion.
Retrieving data ...