mfgtool imx6 sabresd on nand flash

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

mfgtool imx6 sabresd on nand flash

Jump to solution
1,865 Views
ashishgupta
Contributor III

Hi,

I am trying to download nand flash images (prebuild images from freescale) on sabresd imx6q using mfgtool (downloaded from jb422_100 android source, tools).

I have connected sabresd board with host PC (windows) through USB-OTG port with default boot switch settings. But mfgtool is not able to detect the sabresd board.

Please provide steps to use MFGtool for downloading images into sabresd board.

Thanks in advance.

Ashish Gupta

Labels (3)
0 Kudos
1 Solution
811 Views
Rita_Wang
NXP TechSupport
NXP TechSupport

Hi ASHIISH,

You can reference the document Android Quick Start Guide.pdf in android_jb4.2.2_1.1.0-ga_source.tar.

The details on downloading image into sabresd board are in the third part:

                         3 Working with SABRE-SD Board

                              3.3 Downloading Board Images

Best Regards,

Dan

View solution in original post

0 Kudos
3 Replies
811 Views
ashishgupta
Contributor III

Hi Dan,

Thanks for the reference. It really helped me.

Best Regards,

Ashish Gupta

0 Kudos
811 Views
Rita_Wang
NXP TechSupport
NXP TechSupport

Hi Ashish,

It's my pleasure:smileyhappy:

Best Regards,

Dan

0 Kudos
812 Views
Rita_Wang
NXP TechSupport
NXP TechSupport

Hi ASHIISH,

You can reference the document Android Quick Start Guide.pdf in android_jb4.2.2_1.1.0-ga_source.tar.

The details on downloading image into sabresd board are in the third part:

                         3 Working with SABRE-SD Board

                              3.3 Downloading Board Images

Best Regards,

Dan

0 Kudos