Title says it all.
CodeWarrior for MCU should be reserved for Eclipse version.
this is CW for MCU V10.x.
Classic/legacy must be used for all tools using classic IDE (No eclipse tool).
this is the case for:
CW for HC12 V5.1 and older
CW for DSC V8.3 and older,
CW for MGT V9.2,
CW for MPC55xx/56xx V2.9 and older,
If you're using CW for DSC V8.3, the right forum is Classic/Legacy.
In all case we can move a post in a right forum.
this is not a problem.
I reposted in the correct forum, now I want to delete the original post.
BTW, Here's my actual issue:
I'm trying to build a project on my computer (Win 7 64bit) that was
created on a different computer. Both computers have CW 8.3 (About says
5.3, what's with that anyway?) but the tool was installed in a different
folder on my computer. The project builds without error but when I try
to debug I get an error in a dialog box that says "Could not open config
file" along with a lengthy path that ends with 568006_flash.cfg The
path begins with "c:\Program Files" which is where CW was installed on
the other computer. CW can't find the file because the installation on
my computer is in "c:\Program Files (x86)". I suppose I could copy the
Freescale folder from Program Files x86 to Program Files but is seems
like there ought to be a way to debug a project created on a different
computer without that kind of trickery. Anyone know how to fix this
You've installed CW for DSC V8.3 on 2 PCs.
On PC-1 the tool is installed on c:\Program Files\DSCV8.3
On PC-2 the tool is installed on c:\Program Files (x86)\DSCV8.3
How do you have installed the tool on PC-2 ?
with CD or installer file ?
copy the installation folder ?
Retrieving data ...