I have custom board based on i.MX53 QSB.
I have to integrate FEC with Fixed PHY.
I enabled Fixed PHY in kernel (file: drivers/net/phy/fixed.c)
When i tried to load FEC module, i have error: sysfs: cannot create duplicate filename '/class/mdio_bus/0'
I replaced name in drivers/net/phy/fixed.c to "fixed-0".
Now i have error, when i'm trying to turn on my eth interface:
"no PHY found".
Error is in method static int fec_enet_mii_probe(struct net_device *dev)
How to use Fixed PHY with FEC (file: drivers/net/fec.c) ?