I looking for Linux installation on Fedora machine , for I.Mx6 and I.Mx 5 .
can you provide me with Link for the SDK , and instruction for installation , and how to use the SDK environment.
what do you mean by Linux SDK? Are you planing to develop apps for Android or LInux? i.Mx6 and I.mx6?
I want to develop / bringup Linux on custom board based on imx6.
so , I want to install the sdk or the relevant environment for build/compile etc .
my host machine is fedora.
Qiang Li Aug 19, 2013 6:33 PM (in response to imxcommunityscout)
We suggest to use Ubuntu for iMX Linux development, and the documents are also based on Ubuntu.
You can find all release software and document at "https://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX6Q&webpageId=129226228141673454B24A&nodeId=018rH3ZrDRB24A&fromPage=tax".
As you may know, we are moving towards Yocto, so with it you can use most Linux distributions, including Fedora. With Yocto, you can install the toolchain and start generating binaries for your desired platform. For my point of point, it does not matter much the Linux Distribution, what it matters are the tools you are used to, so if those run fine in fedora, so you have the right setup.
Hi Yehuda Marko,
We suggest to use Ubuntu for iMX6 Linux development, and the documents are also based on Ubuntu.
You can use RidgeRun Linux SDK for FreeScale iMX6 Sabre SDP. Please follow the below link:
Getting Started Guide for iMX6 Sabre-SDP - RidgeRun Developer Connection
RidgeRun Linux SDK info for the Boundary devices SabreLite board is below :
Getting Started Guide for iMX6 SabreLite - RidgeRun Developer Connection
Please contact : firstname.lastname@example.org For further support.
RidgeRun Embedded Solutions
Retrieving data ...